For a Free Quote Call Now: (262) 226-9451

Fascia Boards Explained: What They Are and Their Benefits – A Complete Guide

Date: July 14, 2024

Most homeowners think Fascia Boards are just a decorative part of the roof, but they are actually very important. They protect the roof and your home. If you are putting on a new roof or having issues with your current fascia boards, you should think about getting new ones. There are many different types of fascia boards available. You should look at the pros and cons of each type and match them with your needs and budget to choose the best one for your home.

Fascia Boards run along the length of the roof, right below the roof tiles or shingles, and are attached to the end of the roof truss. They support the gutters and seal the roof from the weather.

Different Types of Fascia Board

Aluminum Fascia Boards

Wood Fascia Board

Modern house repair and renovation often involve plastering, applying stucco, and painting the wood fascia board and walls. Wood fascias are the most common type of fascia board and are usually made from cedar, redwood, pine, spruce, or fir. You can prime and paint them to match your house's style.

Pros:

  • Wood fascia adds a natural and beautiful look to the house.
  • They are affordable.
  • They are water-resistant.
  • They give a classic or rustic appearance.
  • When painted, they are sturdy and withstand weather well.

Cons:

  • Repair and maintenance costs are higher compared to other materials.
  • Durability depends on the quality of the paint and primer used.

PVC Fascia Boards

PVC fascia boards are made from plastic, the same material used for pipes and tubes, but they resemble wood-based fascia boards. They have a key advantage over wood in that they are more resistant to rot and still look good. PVC fascia boards are available in a wide variety of colors and can be painted to match your preferences. However, since PVC expands, it's best to use glue and headed nails to secure the boards to your roof.

Pros:

  • Highly resistant to rot.
  • Available in many colors and can be painted.
  • Durable and long-lasting.
  • Low maintenance.

Cons:

  • Expansion and contraction with temperature changes require careful installation.
  • Can be more expensive than some other materials.

Composite Fascia Boards

Composite fascia boards are made from recycled wood chips, plastic, and sawdust bonded with epoxy resin. Though not as popular as wood, they are gaining popularity due to their benefits.

Pros:

  • Composite material does not rot.
  • They are colorfast and resist decay.
  • They can be easily cut, nailed, screwed, and installed like wood fascia.
  • They are highly durable.

Cons:

  • They cannot be refinished, and color options are limited.
  • They are more expensive than other fascia materials.
  • Repair costs are high.

Aluminum Fascia Trim

Aluminum fascias are becoming popular as they are considered an improved version of wood trim. Although they are more expensive, they offer high durability, reducing fascia and soffit repair issues.

Pros:

  • They are versatile and flexible.
  • Often used with wood fascias to protect against weathering.
  • Easy to cut and install.
  • Durable with low maintenance costs.
  • Can be painted over.

Cons:

  • High installation cost due to the need for specialized skills.
  • Prone to dents and scratches.
  • Can rust when installed with steel nails.

Vinyl Fascias

Vinyl fascias are ideal for DIY installation and are commonly used for soffits, meeting building code standards. They can easily match or complement siding.

Pros:

  • Highly durable and easy to install.
  • Available in various colors.
  • Low repair and maintenance costs.
  • Discoloration can be cleaned easily.

Cons:

  • Requires a tight seal to stay waterproof.
  • Moisture can damage the interior if it seeps through.
  • Expands and contracts with temperature changes.
  • Color may fade with sun exposure.

What Is the Purpose of Fascia Boards?

Fascia boards mainly protect the edge of the roof from moisture. The edges of a sloped roof are vulnerable because rainwater can get under the shingles. Wind can also push rainwater into the roof from different directions, so a strong board is needed to protect these areas. Fascia boards also make the roof look nicer and provide a place to attach gutters. Their vertical position is perfect for K-style gutters because the square back of the gutters fits well with minimal gaps.

The Benefits of Fascia Boards

Keeping your roofline in good condition is crucial for your home's structural integrity, and fascia boards play a key role in this. Here are some benefits of fascia boards and reasons to consider investing in them:

  1. Reducing Moisture Levels Fascia boards help prevent moisture from entering your roofline. If moisture builds up, it can lead to rot and decay, causing serious and expensive damage. For the best protection, install both fascia and soffit boards to keep your home adequately shielded.
  2. Supporting and Protecting the Roofline Fascia boards have strong load-bearing capabilities, essential for supporting the bottom row of roof tiles. Proper maintenance is crucial, and any damage or weaknesses should be repaired promptly to ensure the roofline stays supported.
  3. Supporting Gutters Fascia boards support your gutter system, helping to direct rainwater away from your home. A sound gutter system is vital, especially during heavy rainfall, as it bears significant weight to divert water away from your property.
  4. Enhancing Home Appearance Fascia boards create a neat and tidy finish for your home's exterior. Paired with soffit boards, they add refinement and style, improving the overall aesthetic appeal of your home.
  5. Pest Prevention Fascia boards cover the exposed edge of your roofline, acting as a barrier to prevent pests and rodents from entering your home.
  6. Weather Protection Fascia boards cover the exposed edges of your roofline, reducing the risk of damage from the elements. For optimal protection, installing both fascia and soffit boards will create a strong defense for your roof.

Fascia Boards Maintenance

Fascia boards, like other parts of the roof, need maintenance. Wooden fascia boards can rot, so watch for blisters or cracks in the paint. The spots where gutter fasteners go into the fascia are also weak points. If you see signs of rot, get your fascia boards fixed by a trusted roofing contractor quickly. Ignoring this can lead to moisture getting into your roof and may cause the gutter fasteners to fall off.

Call a Professional for Installation

Installing fascia boards can be a complex task, especially if you're dealing with different materials or have noticed damage that needs repair. For best results, it's important to call a professional roofing contractor for the installation. They have the experience and tools to ensure the fascia boards are installed correctly, which helps in preventing moisture infiltration, supporting the gutter system, and maintaining the structural integrity of your roof. A professional can also help you choose the right type of fascia board that fits your home's needs and your budget.

Headquarters
137 Wisconsin Ave
Waukesha WI 53186
Email
modernxoffice@gmail.com
Phone
(262) 226-9451
Social
financing option for roof
© Copyright 2024 Modern Exterior Roofing. All Rights Reserved. Website & Marketing by DUSK Digital.